Chatbot OS by OscillatorSynk
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 80.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 78.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 4'.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 60.34Hz (8) and is modulated by Mod Wheel, Note Vel, LFO 1, VCF Env.
LFO 1 direct modulation amount for low-pass filter cut-off frequency is 40.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 162.
Low-pass filter envelope amount is modulated by Note Vel, Mod Wheel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 189.
Mod Wheel mod-matrix 2 modulation amount for low-pass filter envelope amount is 59.
Note Num direct modulation amount for low-pass filter envelope amount is 139.
Filter resonance is set to 33 and is modulated by Mod Wheel, LFO 2.
LFO 2 mod-matrix 3 modulation amount for filter resonance is 6.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±24 cents (125).
Oscillators drift level is manually set to 7. Drift rate is 0
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -12 semitones and is modulated by LFO 1.
LFO 1 mod-matrix 1 modulation amount for oscillator 2 pitch is 14.
Tuning pitch
Patch Chatbot OS is transposed by 12 semitones.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is manually set to 5.
Rotary Speaker fx
not yet complete
Mod Wheel modulator
Controls VCF Envelope, VCF Cut-off Frequency, Mod Matrix Routing 3 Depth, VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Envelope | 59 |
| timbre | fader-indirect | VCF Cut-off Frequency | 162 |
| matrix | Mod Matrix Routing 3 Depth | 20 | |
| timbre | cross-mod | VCF Resonance | 134*148 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 139 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 162 |
| menu | VCF Envelope Velocity Sensitivity | 189 | |
| menu | VCA Envelope Velocity Sensitivity | 78 |
LFO 1 modulator
Controls VCF Cut-off Frequency, OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 40 |
| pitch | matrix | OSC 2 Pitch | 14 |
| name | value |
|---|---|
| LFO 1 Rate | 1.92Hz (133) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Sample & Hold |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | on |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 6 |
LFO 2 modulator
Controls VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Resonance | 6 |
| name | value |
|---|---|
| LFO 2 Rate | 0.39Hz (78) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sample & Hold |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | on |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.39s (66) |
| VCA Envelope Sustain Level | 21% (54) |
| VCA Envelope Release Time | 0.16s (28) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 162 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.37s (63) |
| VCF Envelope Sustain Level | 9% (23) |
| VCF Envelope Release Time | 0.46s (78) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 81 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |